Experiment and simulation of Self-excited torkbuster

Volume 4, Issue 1, February 2019     |     PP. 1-18      |     PDF (1177 K)    |     Pub. Date: March 23, 2019
DOI:    365 Downloads     7178 Views  

Author(s)

Hongyan Ma, Directional Drilling branch,Bohai Drilling Engineering Company, Tianjin, China
Hao Zhang, Directional Drilling branch,Bohai Drilling Engineering Company, Tianjin, China
Yuanpeng Chen, Directional Drilling branch,Bohai Drilling Engineering Company, Tianjin, China
Mingchuan Wang, Directional Drilling branch,Bohai Drilling Engineering Company, Tianjin, China
Jie Zhang, Directional Drilling branch,Bohai Drilling Engineering Company, Tianjin, China
Fangang Kong, Directional Drilling branch,Bohai Drilling Engineering Company, Tianjin, China
Weiran Li, Directional Drilling branch,Bohai Drilling Engineering Company, Tianjin, China
Wei Shan, Directional Drilling branch,Bohai Drilling Engineering Company, Tianjin, China
Jin LI, Directional Drilling branch,Bohai Drilling Engineering Company, Tianjin, China
Zhiling Wang, Directional Drilling branch,Bohai Drilling Engineering Company, Tianjin, China

Abstract
The stick-slip vibration in deep hard formation is a technical bottleneck restricting the efficient use of PDC bit.In order to combat the stick-slip phenomenon during drilling in deep hard formations, we introduced thehigh frequency self-excited torkbuster. Based on the analysis of the working principle of the torkbuster, a nonlinear dynamic three-dimensionalmodel of PDC bit is established by using the finite element software (ANSYS/LS-DYNA). The wear conditions and themotion characteristicsof the PDC bit as well as the failure of the rock are simulated with and without the action of the high frequency torsional impact, and several field experimentsare conducted.The results show that the high frequency torsional impact force generated by the torkbuster can effectively improve the uniformity of the force on the PDC bit and rock, and restrain the stick-slip vibration and the damage of the cutters.The experimental results show that the torkbuster can improve the rock breaking efficiency and shorten the drilling cycle, and provide an important technical reference for the torsional impact technology applying in deep hard formations

Keywords
PDC Bit, Torkbuster, The Finite Element Analysis, Torsional Impact, Stick-slip Vibration

Cite this paper
Hongyan Ma, Hao Zhang, Yuanpeng Chen, Mingchuan Wang, Jie Zhang, Fangang Kong, Weiran Li, Wei Shan, Jin LI, Zhiling Wang, Experiment and simulation of Self-excited torkbuster , SCIREA Journal of Energy. Volume 4, Issue 1, February 2019 | PP. 1-18.

References

[ 1 ] J. Yang,Research and application of PDC drill bit vibration assisted rock tools. WuHan: School of Petroleum Engineering Yangtze University, 2014.
[ 2 ] W. Li, X. P. He, T. Yan and S. C. Wang,Rock fragmentation mechanism and application of near-bit torsion impacter,Oil drilling & production technology, 2014,36(5):1-4.
[ 3 ] X. Chen, S. Y. Chen, C. Wang and R. Y. Rui, Application of TorkBuster to sidetracking of slimhole horizontal well in Well Songshen 9H.Oil drilling & production technology, 2014,34(2):32-35
[ 4 ] H. W. Zhang and Y. J. Ma,Analysis and Study on Application of TorkBuster Torsional Impactor, Liaoning Chemical Industry, 2012,41(8):841-843
[ 5 ] J. W. Zheng, Y. H. Kuang, X. Wang, Z. Y. Zou, Y. Z. Chen and Y. X. Yang, Simulation study on he drilling of PDC bit at compound drilling condition (In Chinese), China Petroleum Machinery, 2016,44(1):40-44.
[ 6 ] C. Q. Zha, G. H. Liu, J. Li, Y. Xi and T. Zhang, Analysis of torsional vibration characteristics of PDC bit and design of the damping tool (In Chinese), China Petroleum Machinery, 2017,45(3):1-5.
[ 7 ] J. G. Xu, J. Yang, R. D. Tao and J. Chen, Self-excited oscillation rotary percussion drilling tools in dagang oilfield application (In Chinese),Drilling & production technology, 2013,36(3):124-125,128
[ 8 ] H. S. Zhang, J. R. Ge, J. Yang, J. G. Yang, Z. Q. Li and L. L. Shi,. Effect evaluation of torsion impactor for increasing ROP in offshore deep formation,Fault-block oil & gas field, 2014,21(2):249-251.
[ 9 ] C. H. Fu, Z. Q. Chen, Y. He, D. F. Wei, K. Q. Liu and J. Hu, Structural design and performance analysis of novel torsional impact tool (In Chinese), China Petroleum Machinery,2017,45(11):7-12.
[ 10 ] C. Min, S. Z. Zhou, M. Q. Li and J. W. Li, Numerical simulation of internal flow field in hydraulic circumferential torque impact generator (In Chinese), China Petroleum Machinery, 2018, 46(1):1-6.
[ 11 ] H. H. Li, Y. X. Wang andQ. J. Li,Experimental application of torque compactor in Well Zhaoshen 17 in Daqing Oilfield, Exploration Engineering, 2013,40(4):44-47.
[ 12 ] X. L. Yang, J. W. Song, S. M. He, X. L. Yu, T. Wang and L. Zhang,Evaluation of Parameters for Torsional Impact to Break Rock,Oil field equipmentil, 2014,43(9):4-8.
[ 13 ] Q. Zhang, D. Li, W. Q. Jing and S. S. Hu,Research and Finite Element Analysis on Aggressive Single-cutter Placement of PDC Drill Bit,China Petroleum Machinery, 2014,42(10):5-8.
[ 14 ] Z. Q. Huang, L. Tan, X. Jin, Q. Li and Z. Q. Wei,Simultion study on rock breaking mechanism of percussion rotary drill bit bass on ls-dyna, Natural gas industry, 2007,27(4):76-78.
[ 15 ] J. Zhang,PDC shock resistance and structural parameters optimization research,Wu Han: Wuhan University of Technology, 2012.
[ 16 ] W. Li, W. F. Sun, T. Yan, S. C. Chen and Y. Li, Field test of torsion impactorin well Jinyue 7-1 (In Chinese), China Petroleum Machinery, 2017,45(3): 35-39.
[ 17 ] X. H. Dong and Y. T. Li, Application of consistent-WOB-torque drilling speed improving tool in well Xiahe 1, China Petroleum Machinery, 2017,46(6):38-42.
[ 18 ] L. C. Xuan, Z. C. Guan, H. G. Hu and J. J. Li, Design and application of experimental apparatus for rock breaking by rotary percussion (In Chinese), Oil Drilling & Production Technology, 2016,38(1): 48-53.
[ 19 ] J. G. Xu, J. You, R. D. Tao, J. J. Wang, D. H. Lv and T. G. Fu, Applicationof torkbuster in well yaxi102 of yumeng ollfield.Drilling & production tech- nology, 2013,36(4):37-39.